Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateStyles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
See the difference
Before
After
Before
After
Before
AfterHow Much Does Spring Replacement Cost in Taunton?
Spring replacement in Taunton, MA typically costs $180-$340 for a single torsion spring, including the part and the labor to install it. A matched pair usually replaced together runs about twice that, roughly $360-$680, since both springs wear at the same rate and leaving one old spring in place invites a second failure. These are typical estimated ranges for the Taunton market in 2026; your written estimate sets the final price.
We treat spring work as a specialty, not a side job. A broken torsion spring stores enough tension to cause serious injury if it slips, and it’s one of the few garage door repairs we’d never hand to a generalist. The company handles spring replacement directly, on the brand of door you actually own. Call (833) 495-0837 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- One spring: $180-$340. A matched pair: about twice that, since both usually get replaced together.
- We service doors and openers from LiftMaster, Chamberlain, Genie, Clopay, Amarr, Wayne Dalton, Craftsman, and Raynor.
- Spring repair is safety-critical – a snapped spring can leave a door stuck open or half down, and that’s a home-access problem, not just an inconvenience.
- Our technicians have up to 12 years of experience on spring and opener work.
- Written estimates are free, and the price is set per job.
Spring Replacement Cost Breakdown (2026)
Here’s how the numbers usually break down for a Taunton spring job. The ranges below are typical estimates for this market, and each line is separate so you can see where the money actually goes.
| Line item | Typical estimated range | What it covers |
|---|---|---|
| Single torsion spring (one spring) | $180-$340 | Part plus labor for one spring |
| Matched pair of springs | About twice the single range | Both springs replaced together, as they usually wear evenly |
| Cable replacement (if cables are worn) | $130-$250 | New cables when the old ones are frayed or kinked |
| Roller replacement | $110-$220 | Quieter, smoother travel when rollers are shot |
| Track realignment | $120-$240 | Resetting a bent or knocked-out track |
| Opener repair (if the opener is failing too) | $120-$320 | Motor, logic board, or travel adjustment |
| Panel replacement (impact damage) | $250-$500 | Single-section swap on a dented or cracked panel |
| Full garage door repair (broad scope) | $150-$600 | When several parts fail at once |
| New door installation | $700-$2200 | Full replacement if the door itself is beyond repair |
What pushes a spring job toward the top of the range? A matched pair instead of a single spring, a door that’s carried a heavy insulated panel for years, or a failure that takes a cable or track with it. What pulls it down? A clean single-spring swap on a door where nothing else is worn. We price per job with a written estimate, so you’ll know which bucket you’re in before anyone touches the door.
What Affects Spring Replacement Pricing in Taunton
- How many springs your door carries. Most residential doors use either one spring or a pair. If you have a pair, plan on roughly double the single-spring range – the springs share the load and age together, so replacing one and leaving the other invites a second callout.
- Spring type and rating. Torsion springs (the wound-bar type mounted above the door) versus extension springs (the stretched type running along the tracks) price differently, and springs are matched to the door’s weight. A heavier insulated door needs a stiffer spring, which can nudge the number up.
- Door weight and brand. We work on Clopay, Amarr, Wayne Dalton, Raynor, and Craftsman doors, among others, and the door’s construction affects both the spring spec and how long the swap takes. Riding out a Taunton winter with an unbalanced door wears the spring faster, so a door that’s been fighting ice and cold all season may need more than the bare spring.
- Condition of cables, rollers, and track. A spring rarely fails alone. If the cables are frayed or a track is knocked out, we’ll quote those pieces separately so you see the whole picture rather than getting surprised after the fact.
- Access and door height. A standard seven-foot door is the simplest job. Taller doors, low-clearance setups, or a door jammed in a tight bay take longer and require more care with the winding bars.
- Whether the door is stuck open or shut. A door locked half-open is a security issue for the home, and clearing it safely before the spring swap is part of the job.
How to Save on Spring Replacement
You can’t dodge a broken spring forever, but you can keep the final bill from climbing. A few practical moves:
- Replace the pair, not the single. It sounds like more money up front, but a matched pair spreads the cost over a longer stretch and skips a second service visit when the other spring lets go. We quote it honestly either way.
- Catch wear early. A door that’s gotten harder to lift, a gap between the door and the floor, or a garage door opener that strains to raise the door can all point to a weakening spring. Flagging it before it snaps usually means a simpler, cheaper job.
- Bundle worn parts in one visit. If the rollers are shot or the track is out, doing those alongside the spring saves you a separate estimate and a second dispatch.
- Ask for the written estimate up front. We give free estimates, and the written quote is what you pay – no surprises once the truck’s in the driveway. Call (833) 495-0837 to set one up. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
- Don’t let a failing spring sit. Running a door on a tired spring strains the opener and the cables, and that’s how a $180-$340 job turns into a broader repair.
If you’re pricing out the whole picture, our page on spring replacement walks through what the job involves from start to finish, and our main page at Taunton Garage Door Repair Pros covers the full range of services. If your opener is part of the problem, the same visit can handle it – we’re familiar with both LiftMaster and Chamberlain/myQ smart-home platforms as well as Genie.
FAQs – Spring Replacement Cost
How much does spring replacement cost in Taunton?
Spring replacement in Taunton typically costs $180-$340 for one spring, or about twice that for a matched pair. That range covers the part and the labor; your written estimate sets the final price. Call (833) 495-0837 for an exact quote – estimates are free.
Is it cheaper to repair or replace a garage door with a broken spring?
Repairing the spring is almost always cheaper than replacing the door. A spring swap runs $180-$340 for one spring or about double for a pair, while a full new door installation starts around $700 and up to $2200. You’d only consider replacement if the door panels or frame are structurally damaged. Call (833) 495-0837 and we’ll tell you which side of that line you’re on – estimates are free.
Can you replace my spring the same day?
Yes, spring replacement is a same-day job in most cases. A broken spring leaves your door stuck and your home less secure, so we treat it as a priority. Call (833) 495-0837. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why does a pair of springs cost about twice a single spring?
A pair costs about twice a single spring because you’re buying two parts and the labor to install both. Springs on a two-spring door share the load and wear at the same rate, so replacing both at once is standard practice. Expect roughly $360-$680 for a pair versus $180-$340 for one. Call (833) 495-0837 for a precise quote – it’s free.
Do you charge more for an emergency spring repair?
No – the price is set per job by the written estimate, not by the clock. A broken spring is a safety and security issue, so we treat it that way and quote the same way regardless of when the call comes in. Call (833) 495-0837. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Choose a Spring Specialist in Taunton
Spring replacement is the job most generalists won’t touch, and there’s good reason: a torsion spring under load can cause serious injury if it’s handled without the right tools and training. We do spring work directly, on the door you actually own – whether it’s a Clopay, Amarr, Wayne Dalton, Raynor, or Craftsman install. Our technicians have up to 12 years of experience, and every job on our schedule is a garage door job. No divided attention.
That single-trade focus matters when a spring fails and your door is stuck open to the neighborhood. Your garage door is a security system as much as it is an entry point, and a door that won’t close leaves the home exposed. From a snapped spring to a door jammed mid-travel, we get you from stuck to fully operational, and if the door itself is past saving, the same company that repairs your spring today can supply and install a full new door. One call, one specialist, no referral runaround.
Get a Free Spring Replacement Estimate in Taunton
If your spring has snapped or your door is straining to open, don’t wait for it to fail completely. Call (833) 495-0837 for a free estimate on spring replacement in Taunton. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 12 years of experience, we work on the eight major brands you’re most likely to own, and the written quote is the price you pay. Let’s get your door back to fully operational.
Pricing reflects the Taunton market as of 2026. Taunton Garage Door Repair Pros offers free estimates – call (833) 495-0837.
Written by the team at Taunton Garage Door Repair Pros.
What Our Customers Say
"Fixed the spring properly and the door works fine. He did leave the old spring and some hardware by the side of the house, and I had to text to ask about hauling it off. They came back for it, just took a couple of days."
- Shannon Whitaker"Track was bent and two of the rollers were shot. He straightened what he could, swapped the rollers for nylon ones, lubricated everything, and had it done in about an hour."
- Mark Ziegler"Door installed in about four hours, old one hauled away, and he stayed to program both cars and the wall panel before he left."
- Jennifer Brooks